Making your fog-lights work regardless of high and low beams

By: BigBabyLou

The Fix:

Find the fog light relay. Cut the light green wire and connect it to ground.
Detailed Instructions:

Find the fog light relay. On a GTA, it’s located most likely in the engine bay by the battery (bolted to the fender). On a Camaro, I am not sure yet but it might be under the dash.

The relay will have 4 wires coming out of it: red/white, purple (might be two wires), brown/white, light green.

Cut the light green wire where it comes out of the relay and connect it to ground. Then take the other part of the light green wire (the one that goes into the harness) and insulate it so that it doesn’t short out.

You’re good to go. Now you can turn on your foglights ANYTIME your parking lights are on, regardless of high and low beams.

If you have any questions about the fix or feedback on this article, feel free to contact me.
Lou.

ATGO is not responsible for any damage done to your vehicle by following the above instructions.